Features:K8 designed in Milan,it's originally EU market customizedHidden Handle design, easily carriedOff road wheel design , easily catch eyes among the average modelsSlim and light weightGreen lines on PedalAdvantages:
Koowheel don't make low quality products
K8 remains the Top quality standard
Use only the Top suppliers for PCB, Motor, Charger
The most reliable 24V 6.5inch hoverboard
Battery meets all safety standards
Lowest defective rate
| K8 Specification |
|
| Performance Parameter | input voltage | 29.4V |
| output voltage | 29.4V |
| Max speed | 10km/h |
| working voltage | 23v-29.4V |
| Battery discharge capacity | 10A |
| battery capacity | 4.4AH |
| Physical parameter | Max load | 80KG |
| Size | length: 594MM
width: 187.5MM
height: 175MM |
| Net Weight | 8.65 KG |
| Operating temperature | -10--60ºC |
| Operating environment | Max angle: 18°
ground clearance ≤3CM |
| Range | 12.5KM(70KG) |
| Max climing angle | 18°(70KG) |
| Naming rule of production date | --Year--Month--Date |
| IPX grade | IPX4 |
| Storage temperature | -20---60ºC |
| Charger | power rating | 58.8W |
| Manufacturer | AOI |
| Voltage | AC input voltage AC100V-240V , DC output voltage DC29.4V |
| DC output current | 2000MA |
| Charging temperature | 0--45°C |
| Model No | AOI-08294200DD1 |
| Functional parameter | Malfunction indicator | Indicator blinks,evaluate the problem by the blinking times |
| Speed warning | When the motor's speed reaches the setting warning speed of 10km / h, the warning buzzer alarms;when it below the speed limit (set value: 10km / h), the warning buzzer does not alarm. |
| Power indicator | Under voltage mode: greater than 23V , green light, less than 23V and greater than 22.3V,yellow light, less than 22.3V red light. |
| Speed limit | when the motor's speed reaches the speed limit, Warning buzzer alarms; Otherwise it doesn't alarm. |
| Motor 's load short circuits protection | when the motor short circuit occurs in running, the controller will protects immediately,to prevent against other power pipes due to chain reaction |
| Buzzer | when the controller fails or motors over speed (reach to the Set warning value) / power, the buzzer will alarm ) |
| Gyroscope angle calibration | power on and hold the power button for 5 seconds (cannot be released) to start calibration gyroscope, calibration is completed after the taillight blinking, buzzer sounds, restarting resume riding function; angle correction range of ± 10 . |
| Auto-sleep function | when pedals without sensing anything in 10 minutes, the controller will shut it down automatically. |
| Voice Guide | No |
| How to use | A:Turn on the board, press the "power on / off" button;The board is on when hearing the honk sound and LED indicator light is on. 2. Step on the board and keep balance. Firstly put one foot on the foot pad then slowly move the body's focus on the foot pad, and then raise another foot slowly from the ground and place on the foot pad.
B: Forward / Backward / Brake: 1.Lean the body Slowly forward and feel the balance of the board to move forward, and then stand straight and feel slowing down and braking the board. Keep the speed not too fast. 2. Lean the body backwards slowly to go backward, and then stand straight and feel slowing down and braking the board. 3. When moving forward or backward, keep the body vertical with board to go forward or backward or stop the board. Put the weight of the body evenly in the center of the pedal to achieve a stable braking.
C:turn: the balance scooter will be in accordance with the direction of your movement and turn. The rotation of the feet to the left or right can make the balance scooter to achieve the corresponding direction of the turn.
D: keep the balance scooter to maintain balance when you are ready to get off the board,, only one foot at a time. Control the body center of gravity, do not shake, especially do not move your body to make the board turn while getting off. |
|
|
|
|
|
|
|
|
How to use
A:Turn on the board, press the "power on / off" button;The board is on when hearing the honk sound and LED indicator light is on. 2. Step on the board and keep balance. Firstly put one foot on the foot pad then slowly move the body's focus on the foot pad, and then raise another foot slowly from the ground and place on the foot pad.
B: Forward / Backward / Brake: 1.Lean the body Slowly forward and feel the balance of the board to move forward, and then stand straight and feel slowing down and braking the board. Keep the speed not too fast. 2. Lean the body backwards slowly to go backward, and then stand straight and feel slowing down and braking the board. 3. When moving forward or backward, keep the body vertical with board to go forward or backward or stop the board. Put the weight of the body evenly in the center of the pedal to achieve a stable braking.
C:turn: the balance scooter will be in accordance with the direction of your movement and turn. The rotation of the feet to the left or right can make the balance scooter to achieve the corresponding direction of the turn.
D: keep the balance scooter to maintain balance when you are ready to get off the board,, only one foot at a time. Control the body center of gravity, do not shake, especially do not move your body to make the board turn while getting off.
